Our customers rate us 4.7 out of 5on Google

Mon–Fri 8am–5pm

Pool Equipment Installation · Walnut Creek, CA

Walnut Creek Pool Equipment Installation

At Advance Pool Care, Inc, we handle Walnut Creek pool equipment installation, including auto-fillers, covers, automation systems and high-efficiency pumps. Some addresses here fall under Contra Costa County, not the city. So the first question for a new install is which office covers yours.

  • Rated 4.7 on Google
  • Three Weekly Plan Levels
At a glance: pool equipment installation in Walnut Creek

Advance Pool Care, Inc does pool equipment installation in Walnut Creek, CA. That means auto-fillers, bubble covers, drain covers, automation systems and high-efficiency pumps. We talk through the pad and your goals before anything is chosen.

Call the office on (925) 309-4685, say what you want added, and a service call follows.

  • High-efficiency pumps and automation systems installed in Walnut Creek.
  • Auto-fillers, bubble covers and drain covers for Walnut Creek pools.
  • A phone call first, then a visit to look at the pad and quote it for your pool.
  • Advance Pool Care, Inc installs automation systems and high-efficiency pumps.
  • Google reviewers describe a pump and filter, and a pool control system and sweep, being installed.
  • Title 20, California's efficiency standard, applies to replacement pool pump motors built from July 19, 2021.

Call or Send the Form

Ask About Your Pool

4.7 on Google
Jandy AquaLink RS8 pool automation panel and phone app

Local Expertise

What a pool equipment installation involves in Walnut Creek

The first step is a phone call about what you want added, followed by a service call to look at the pad. Pentair, Hayward and Jandy equipment is what we work on, and a model is chosen once we have seen what is already there.

More about pool equipment installation in Walnut Creek
  • Pumps

    Ask us about variable-speed pumps. The Energy Commission also says a drive supplied with a regulated variable-speed motor may start out at 55 percent of maximum speed at most.

    It is worth checking the settings that come with a new pump. Which pump fits depends on the plumbing and the filter, and we talk through that with you.

  • Controls and automation

    Controllers come up in installs too. We offer controller programming and equipment demonstrations. The control systems on our list include IntelliCenter and AquaLink RS8.

    One Google reviewer describes a new pool control system and a pool sweep going in. Ask us what a controller would run on your pad, and we will talk through the options.

  • Fillers and covers

    Auto-filler installation, bubble cover installation and drain cover installation are all on our list. Evaporation is a summer matter here.

    A 2022 EBMUD regulation names pool covers among its water-saving guidelines. Ask us which of these jobs fits your pool, and mention the level if it has been dropping.

Jandy variable-speed ePump pool pump

Local Conditions

Reasons Walnut Creek owners ask about new pool equipment

Mention any of these when you call, and we will talk through what to add.

More signs to watch for in Walnut Creek
  • You want phone control. A controller can handle temperature, lighting and filtration from a phone or tablet. Tell us what is on the pad now, and we can talk through what a control system would involve.
  • The level needs frequent topping up. With almost no rain from June through September, a pool drops through the dry months. An auto-filler is one install we offer, and you should tell us if the level keeps falling.
  • Evaporation worries you. EBMUD's drought regulation lists covers on pools and spas as a water-saving guideline. We install bubble covers, so ask whether one suits your pool.
  • Repairs keep returning. A pump or heater that has needed work more than once may be due for replacement. We diagnose first, then talk through installing something new.

About the Area

Walnut Creek permits, jurisdiction and equipment installs

Your address decides which office to ask. Some areas around Walnut Creek are unincorporated and served by Contra Costa County. Inside the city, the pools and spas permit page collects the city's pool and spa guides and a draining guide.

Ask the permit office whether your install needs a permit before you plan it, and what the office needs to see. We can describe the equipment you have in mind, and the office answers the permit question for your address.

Adding equipment? Tell the office what you have in mind on (925) 309-4685.

More about pool equipment installation and Walnut Creek pools

Walnut Creek sits below the western slopes of Mount Diablo. Water leaves a pool by evaporation through the dry months. NOAA's 1991-2020 normals list almost no June to September rain at Concord.

Auto-fillers and covers matter most in an equipment conversation at that time of year. So mention the level if it has been dropping.

The pool care contact page has the form. The pool equipment installation overview covers the service in all our towns, Walnut Creek included.

Payment options are Visa, MasterCard, Amex, PayPal and Venmo. The office line is (925) 309-4685 for anything the form does not cover.

Featured Google reviews

Pool equipment installation in Walnut Creek, CA: rated 4.7 on Google

Reviewers on Google describe a pump and filter going in, and a control system and sweep being added.

Advanced Pool Care has been extremely responsive, both in person and online. They are providing pool maintenance services and installed a new pool control system and pool sweep. Their followup has been extensive and frequent. We would recommend them without reservation.
Revis James · Google review · 5 years agoinstalled a new pool control system and pool sweep
Worked with Mike from Advance Pool Care. Very professional and frank in his advice. Installed a pump and a filter for me and did a great job. Am a newb to pools (came with the home I bought) - and he has been helpful, telling me what to do and what not to. He is now on my speed dial for pool related items now - that should say it all.
Sandeep Kamath · Google review · 6 years agoInstalled a pump and a filter
Advanced Pool is top notch. When my previous pool companies were very slow to respond when I had issues I found mike through a friend and thankful that he came out that day and repaired my issue. Further he recommended upgrades and perform shortly thereafter leaving a sparkling clean pool. Dry happy with Mike and his team at Advance Pool Care. Give them a call
Sean Mendell · Google review · 5 years agorecommended upgrades

Read all our reviews on Google →

FAQs

Frequently asked questions: pool equipment installation in Walnut Creek, CA

Who handles pool equipment installation near me in Walnut Creek?

That would be us. The first step is a call about what you want added; after that we talk through your Walnut Creek pad and arrange a visit.

How much does pool equipment installation cost in Walnut Creek?

What is already on the pad and what you want added drive the cost, and each Walnut Creek quote is written for a single pool. The office at (925) 309-4685 can go through yours.

How much is pool pump installation in Walnut Creek?

Which pump fits depends on the plumbing and the filter, so each pump install is quoted for one pool. Ask the permit office before you plan the work: the City of Walnut Creek's pools and spas permit page collects the city's pool and spa guides, and some addresses fall under Contra Costa County instead.

Does a pool pump use a lot of electricity in Walnut Creek?

It depends on the pump and its settings. Title 20 applies to replacement pump motors built from July 19, 2021, and the Energy Commission says a drive supplied with a regulated variable-speed motor may start out at 55 percent of maximum speed at most. Check the settings that come with a new pump, and ask us about variable-speed models.

Do you repair pool equipment as well as install it in Walnut Creek?

Yes, Walnut Creek pumps and heaters included. When one keeps needing work, we diagnose it first and then talk through whether something new should go in. Our Walnut Creek equipment repair page covers the repair side.

Driving Directions

Driving directions & service access for pool equipment installation in Walnut Creek, CA

The cards below show road routes from Alamo, San Ramon and Dublin. The OpenStreetMap router drew each one between town centers.

From Alamo, CA

Alamo to Walnut Creek

From San Ramon, CA

San Ramon to Walnut Creek

From Dublin, CA

Dublin to Walnut Creek

Get Started Today

Planning new equipment in Walnut Creek?

Fill in the form or phone (925) 309-4685 and say what you would like to add. A look at the pad is next, arranged after we talk it through.

Mon–Fri 8am–5pm · Rated 4.7 on Google

Request Pool Service Call Now: (925) 309-4685